FREE SHIPPING OVER $30— Shopping Made Simple.
Showing 1641–1660 of 1668 results
Product Description Shooters Choice – SHF-919SQ-100 Includes 100 3 inch square patchesShooter™s Choice 100% cotton square gun cleaning patches are not only more absorbent, but will not leave streaks in your barrel.
Product Description Kenwood – A-KENNX1300HDL Turtleback Kenwood NX1300 NEXEDGE Leather Carry Case Holder with Heavy Duty Rotating Belt Loop Protect your radio with this ergonomic case made from premium bonded leather and equipped with a hook and loop heavy duty belt loop for easy and secure carrying. Its rotating clip allows you to easily place…
Product Description UEI Test Instruments – 16345
Product Description UEI Test Instruments – AAC The AAC alligator clip is designed to slip-on to the end of the test lead tip and allow you to securely take measurements on bare wire or test points hands-free. This clip set is safety rated at CAT III 1000V 10A. The AAC features color coded positive /…
Product Description UEI Test Instruments – AAC3 The AAC3 alligator clip is designed to screw-on to the end of the test lead and allow you to securely take measurements on bare wire or test points hands-free. This clip set is safety rated at CAT III 1000V 10A. The AAC3 features color coded positive / negative…
Product Description UEI Test Instruments – AACA5 Works with C160, C161, C163, C165+ For powering and charging analyzer
Product Description UEI Test Instruments – AB13 Works with 550B, PDT550 For powering digital pocket thermometers
Product Description UEI Test Instruments – ABP3 The UEi ABP3 is a set of threaded back probes that can be attached to the end of our standard test leads. These probes are cETLus listed and safety rated at CAT IV 600V 10A. For checking current flow of a wire at the back of a Molex…
Product Description UEI Test Instruments – AC12 The UEi AC12 is a folding carrying case for holding and transporting test leads. The AC12 has 4 separate pockets for storing sets of test leads and probes.
Product Description UEI Test Instruments – AC509 The UEi AC509 is a hard carrying case for holding and transporting combustion analyzers and equipment. The AC509 has a hard clamshell design with a carrying handle. The inner compartment features precision cut foam for safely storing a combustion analyzer, infrared printer, and flue probe. The upper lid…
Product Description UEI Test Instruments – ATL3 The UEi ATL3 is a set of remote grabber clips with female 4mm jacks designed to work with ATLTX modular test lead set. These clips are cETLus listed and safety rated at CAT IV 600V 5A and CAT III 1000V 5A. This grabber clip set features color coded…
Product Description UEI Test Instruments – ATL5 The UEi ATL5 is a set of back probes with female 4mm jacks designed to work with ATLTX modular test lead set. These probes are cETLus listed and safety rated at CAT IV 600V 10A. For checking current flow of a wire at the back of a Molex…
Product Description UEI Test Instruments – ATT29APACK The UEi ATT29APACK is a 10 pack of K-Type temperature probes designed for measuring temperatures in operational units, boilers, and more. The ATT29APACK features a 4 ft. fluoroplastic coated solid wire with a mini K-type connector plug
Product Description UEI Test Instruments – ATT71 The UEi ATT71 is a K-type bead temperature probe designed for measuring temperatures in operational units, boilers, and more. The ATT71 features a 3.1 ft. fiberglass coated braided wire with a standard size K-type connector for clamp/multimeters that only have standard 4mm input jacks.
Product Description UEI Test Instruments – BF102 The UEi BF102 is a barbed brass fitting with a 1/8 in. NPT male end and 1/4 in. barb for connecting a manometer to a pressure source. This fitting includes 18 in. of tubing
Product Description UEI Test Instruments – CM11667/2 A Water Trap drain plug to seal the water trap and to keep potentially toxic condensation from leaking out of the water trap, if current one is damaged or lost
Product Description UEI Test Instruments – KMAF2 Works with KM9106/P, K9206 Replacement filter for filtering out debris before it reaches the sensors
Product Description UEI Test Instruments – RLDLS The UEi RLDLS contains a sample substance to verify the refrigerant leak detector is reading accurately.
Product Description UEI Test Instruments – RLDSENS The UEi RLDSENS is a replacement sensor for the RLD10
Product Description UEI Test Instruments – SM10617 Part of flue gas sampling system Works with KM9106/P, K9206
Bosch HC2093 Bulldog Sds-Plus® Shank Bit 2 Ct 9/16& X 6& X 8&
1 × $8.71 
Bosch HC2312 Bulldog Sds-Plus® Shank Bit Tapcon Hex 3/16& X 3-1/2&& X 6-1/2&
1 × $8.39 
Bosch HC4022 Spline Speed-X 5/8X16/21
1 × $52.20 
Bosch HC4513 Spline Speed-X 1/2X24/29
1 × $35.70 
Bosch HC5021 Sds-Max Speed-X 5/8X16/21
1 × $34.35 
Bosch HC5016 Sds-Max Speed-X 9/16X16/21
1 × $34.35 
Bosch HC4061 Spline Speed-X 1 1/8X16/21
1 × $78.65 
Bando 6PK850 Auto Serpentine Belt
1 × $9.98 
Bosch HC2341 Bulldog Sds-Plus® Shank Bit Tapcon Hex 1/4& X 3-1/2&& X 6-1/2&
1 × $8.95 
Bosch HC4050 Spline Speed-X 1X8/13
1 × $55.00 UEI Test RLDSENS Replacement Sensor (RLD10)
1 × $38.43 
Bosch HC4033 Spline Speed-X 3/4X24/29
1 × $71.70 UEI Test ATL3 Modular Test Lead Tips - Grabber (ATLTX Required)
1 × $12.57 
Bosch HC4073 Spline Speed-X 1 1/4X31/36
1 × $97.65 
Bosch HC2064B25 Bulldog Sds-Plus® Shank Bit 2 Ct 3/8& X 10& X 12& 25Pk
1 × $94.77 
Bosch HC2040B25 Bulldog Sds-Plus® Shank Bit 2 Ct 1/4& X 2& X 4& 25Pk
1 × $57.05 UEI Test KMAF2 Particle Filter w/ Housing
1 × $36.58 
Bosch HC2302 Bulldog Sds-Plus® Shank Bit Tapcon Hex 5/32& X 3-1/2&& X 6-1/2&
1 × $8.31 
Bando 3PK1065 Auto Serpentine Belt
1 × $10.06 
Bosch HC4081 Spline Speed-X 1 3/8X16/21
1 × $62.73 UEI Test ATT29APACK Temperature Probe K-Type Flouroplastic coated
1 × $64.47 UEI Test 16345 Particle Filter for KM9106/P, KM900PLUS, KM940
1 × $14.08 Subtotal: $894.68